renumbering

This document specifies improvements to Customer Edge routers that help mitigate the problems that may arise when network configuration information becomes invalid without any explicit signaling of that condition to the local nodes. This document updates RFC 7084.

In scenarios where network configuration information related to IPv6 prefixes becomes invalid without any explicit and reliable signaling of that condition (such as when a Customer Edge router crashes and reboots without knowledge of the previously employed prefixes), hosts on the local network may continue using stale prefixes for an unacceptably long time (on the order of several days), thus resulting in connectivity problems. This document describes this issue and discusses operational workarounds that may help to improve network robustness. Additionally, it highlights areas where further work may be needed.

In the basic Proxy Mobile IPv6 (PMIPv6) specification, a Mobile Node (MN) is assigned with a Home Network Prefix (HNP) during its initial attachment, and the MN configures its Home Address (HoA) with the HNP. During the movement of the MN, the HNP remains unchanged to keep ongoing communications associated with the HoA. However, the current PMIPv6 specification does not specify related operations when HNP renumbering has occurred (e.g., due to change of service provider or site topology, etc.). In this document, a solution to support HNP renumbering is proposed, as an optional extension of the PMIPv6 specification.

This document briefly introduces the existing mechanisms that could be utilized for IPv6 site renumbering and tries to cover most of the explicit issues and requirements associated with IPv6 renumbering. The content is mainly a gap analysis that provides a basis for future works to identify and develop solutions or to stimulate such development as appropriate. The gap analysis is organized by the main steps of a renumbering process.

This document analyses the problems of updating the IPv6 addresses of hosts in enterprise networks that, for operational reasons, require static addresses.

This document analyzes events that cause renumbering and describes the current renumbering methods. These are described in three categories: those applicable during network design, those applicable during preparation for renumbering, and those applicable during the renumbering operation.

This document reviews the existing mechanisms for site renumbering for both IPv4 and IPv6, and it identifies operational issues with those mechanisms. It also summarises current technical proposals for additional mechanisms. Finally, there is a gap analysis identifying possible areas for future work. This document is not an Internet Standards Track specification; it is published for informational purposes.

This document describes a procedure that can be used to renumber a network from one prefix to another. It uses IPv6's intrinsic ability to assign multiple addresses to a network interface to provide continuity of network service through a "make-before-break" transition, as well as addresses naming and configuration management issues. It also uses other IPv6 features to minimize the effort and time required to complete the transition from the old prefix to the new prefix. This memo provides information for the Internet community.

IPv6 hosts using Stateless Address Autoconfiguration are able to configure their IPv6 address and default router settings automatically. However, further settings are not available. If these hosts wish to configure their DNS, NTP, or other specific settings automatically, the stateless variant of the Dynamic Host Configuration Protocol for IPv6 (DHCPv6) could be used. This combination of Stateless Address Autoconfiguration and stateless DHCPv6 could be used quite commonly in IPv6 networks. However, hosts using this combination currently have no means by which to be informed of changes in stateless DHCPv6 option settings; e.g., the addition of a new NTP server address, a change in DNS search paths, or full site renumbering. This document is presented as a problem statement from which a solution should be proposed in a subsequent document. This memo provides information for the Internet community.

This document defines a mechanism called Router Renumbering ("RR") which allows address prefixes on routers to be configured and reconfigured almost as easily as the combination of Neighbor Discovery and Address Autoconfiguration works for hosts. [STANDARDS-TRACK]

This document defines changes to the Domain Name System to support renumberable and aggregatable IPv6 addressing. [STANDARDS-TRACK]

This document attempts to clearly define the concept of network renumbering and discuss some of the more pertinent reasons why an organization would have a need to do so. This memo provides information for the Internet community. This memo does not specify an Internet standard of any kind.

Routers interact with numerous network infrastructure servers, including DNS and SNMP. These interactions, not just the pure addressing and routing structure, must be considered as part of router renumbering. This memo provides information for the Internet community. This memo does not specify an Internet standard of any kind.

Hosts in an IP network are identified by IP addresses, and the IP address prefixes of subnets are advertised by routing protocols. A change in such IP addressing information associated with a host or subnet is known as "renumbering". This memo provides information for the Internet community. This memo does not specify an Internet standard of any kind.

Because of the urgent need for, and substantial difficulty in, renumbering IP networks, the PIER working group is compiling a series of documents to assist sites in their renumbering efforts. The intent of these documents is to provide both educational and practical information to the Internet community. This memo provides information for the Internet community. This memo does not specify an Internet standard of any kind.